10-0360

DDA 3 / 100 - Automatic Force-Ductilometer

(test length up to 100 cm)

Elongation-Tests:
ASTM D 113 - AASHTO T51 - JIS K2207
DIN 52013 (IP 32, NF T66-006)

With further accessories suitable for:

Recovery-Tests:
ASTM D 6084 - IP 516 - EN 13 398 (DIN V 52021-1)
(ASTM D 5892 - ASTM P 226)

Force-Tests:
EN 13 589 - IP 520
EN 13 703 - IP 515 - AASHTO T300

Features:

• variable traction speed up to 140 mm/min.
• force detection by high resolution (10 mN) 300 N-sensors
• automatic rupture detection above 20 mN is possible
• constancy of speed and temperature at minor bath motion
   is better than demanded by the standards
• without cooling coils, therefore easy to clean

Bath: for 3 simultaneous tests, made of stainless steel, double-walled and full insulated, closed cycle cooling system, circulation pump to be switched off, temperature probe, bath illumination and acrylic bath cover.

Control Unit: with microprocessor, membrane keypad, analog output for 3 force-channel line-recorder, RS 232-interfaces for printer & PC
Digital display (LCD) of: program, traction speed, distance, tensile force and temperature

4 Programs:
- Semi-Automatic Elongation for rupture forces below 20 mN
- Automatic Elongation for rupture forces of 20 mN to 300 N
- Semi-Automatic Elastic Recovery for polymer modified
  bitumen (in accordance with ASTM D 6084, EN 13398 and other methods)
- Automatic Elastic Recovery for polymer modified bitumen
  (similar to ASTM D 6084 and other methods)

Serial Impact Printer: for single sheet & continuous paper (incl. data transmission cable) for printouts of 3 test points with following parameters: program, traction speed, distance, tensile forces, temperatures, percentage of elastic recovery, energy (the result of integral) (not suitable for DDACon-Software printouts)

Supplied with:
3 molds (acc. ASTM D 113, if not ordered otherwise),
3 mold-holders,
2 corrosion protection specimen,
2 contrast inlays and distance pieces

Note: External cooling device for filling the bath-jacket is required.
Windows® PC-Software DDACon is available.

Power supply: 220/240 V, 50/60 Hz, EU-plug

10-0361

DDA 3 / 100 - Automatic Force-Ductilometer

(test length up to 100 cm)

Like 10-0360 but:
Power supply: 115 V, 60 Hz, US-plug

10-0364

DDA 3 / 150 - Automatic Force-Ductilometer

(test length up to 150 cm)

Elongation-Tests:
ASTM D 113 - AASHTO T51 - JIS K2207
DIN 52013 (IP 32, NF T66-006)

With further accessories suitable for:

Recovery-Tests:
ASTM D 6084 - IP 516 - EN 13 398 (DIN V 52021-1)
(ASTM D 5892 - ASTM P 226)

Force-Tests:
EN 13 589 - IP 520
EN 13 703 - IP 515 - AASHTO T300

Like 10-0360 but:
with 3 contrast inlays with distance pieces and differing technical data.

Power supply: 220/240 V, 50/60 Hz, EU-plug

10-0365

DDA 3 / 150 - Automatic Force-Ductilometer

(test length up to 150 cm)

Like 10-0364 but:
Power supply: 115 V, 60 Hz, US-plug

10-0380

Circulator (-40/+200) with accessories

For heating & cooling of instruments without circulation pump
(e.g. bath jacket filling device) and / or for tempering applications directly in the bath.

Consisting of:
Cooler with stainless steel bath. Thermostat with digital display, splash-proof keypad, heater, pump, RS232/RS485-interface, Pt-100-socket, programmer, over/under-temperature & low-level protection, adjustable pump-pressure, proportional cooling control.

Supplied with: 1 bath cover, 1 drain tap, 1 junction line for temperature probe (10-0382)

Note: Insulated hose-set is recommended.

Technical Data:
Working range: -40 to +200 °C (at +5 to +40 °C ambient temp.)
Display / Resolution: VFD & LCD / 0. 01 or 0.01 °C
Control: Integrated Programmer
Heater capacity: 2000 W
Cooling capacity: 680 W at +20 °C
Pump-Pressure capacity: 22-26 l/min, 0.4-0.7 bar (5.8-10.2 psi)
Pump-Suction capacity: 22-26 l/min, 0.2-0.4 bar (2.9-5.8 psi)
Bath opening: 23 x 14 x 20 cm (WxDxH)
Safety class / Bath fluid: 3 / FL (Flammable Liquids possible)
Volume: 16 l
Sockets for: Pt-100, solenoid valve
Dimensions / Weight: 37 x 46 x 71 cm (WxDxH), 49 kg
Power supply: 230 V, 50 Hz, 13 A, EU-plug

10-0381

Circulator (-40/+200) with accessories

Like 10-0380 but:
Power supply: 230 V, 60 Hz (115 V not available)

25-0228

Hose-Set (Ø 8 mm)

insulated, 2 x 2 m, incl. fittings

10-0404

PC Software - DDACon (Windows®)

A program for recording, saving and graphic presentation of
DDA values.
Replacing analog line recorder or serial serial printer, allows to control the DDA by PC, the data-transfer to MS EXCEL® or LIMS and simplifies the download of firmware-upgrades.

Supplied with: 1 PC-data-cable,1 USB/RS232-converter

10-0335

Mold (4-piece), brass

for bitumen briquettes preparation acc. to:
ASTM D 113 (2007) - AASHTO T 51
Note: the (year of issue) refers to latest changes in molds only!

10-1337

Mold (4-piece), brass

for bitumen briquettes preparation acc. to:
ASTM D 6084 (2006) - AASHTO T300
Note: the (year of issue) refers to latest changes in molds only!

10-0332

Mold (4-piece), brass

for bitumen briquettes preparation acc. to:
EN 13 398 (2003) - IP 516 - DIN 52 013 (2007)
Note: the (year of issue) refers to latest changes in molds only!

10-1336

Mold (4-piece), brass

for bitumen briquettes preparation acc. to:
EN 13 589 (2003) - IP 520 - DIN EN 13 589 (2008)
EN 13 703 (2003) - IP 515
Note: the (year of issue) refers to latest changes in molds only!

10-1333

Mold Holder (fits all petrotest ductility molds)

10-0379

Calibration Set - DDA

Consisting of:
1 set of precision resistor plugs,
1 certified thermometer (0 to +50 : 0.1°C),
1 thermometer holder,
1 digital stop watch,
1 tape-measure with mm-division,
3 weights with steel-rope & 1 pulley

10-0383

Thermometer DIN 12775 - E0,1/0/50

Range: 0 to +50 : 0.1 °C
Length: 220 mm, Immersion: --, Ø 8 mm

10-0384

Thermometer DIN 12775 - E0,1/0/50

Range: 0 to +50 : 0.1 °C (officially certified)

10-0403

Rack, 80 x 25 x 42 cm (L x W x H)

to place controller and printer behind the Ductilometer

18-0403

Circulator-Bath (+20/+150)

For direct tempering in the bath and / or
for heating of small instruments without circulation pump (external tempering).

Consisting of:
Stainless steel bath with adjustable intermediate bottom and cooling-coil.
Thermostat with digital display, splash-proof keypad, heater, pump, RS232-interface, over-temperature- & low-level-protection.

Supplied with:
1 bath cover Ø 5 cm, 1 bath cover 20 x 20 cm, 1 thermometer (-2 to +105 : 0.5 °C)

Note: Requires counter-cooling for applications near ambient temperatures.
Insulated hose-set is recommended.

Technical Data:
Working range: +20 to +150 °C (at +5 to +40 °C ambient temp.)
Display / Resolution: LED / 0.01 °C
Heater capacity: 2000 W
Pump-Pressure capacity: 15 l/min, 0.32 bar (4.64 psi)
Bath opening: 20 x 20 x 25 cm (WxDxH)
Safety class / Bath fluid: 3 / FL (Flammable Liquids possible)
Volume: 20 l
Dimensions / Weight: 37.5 x 45 x 47.5 cm (WxDxH), 3.4 kg
Power supply: 230 V, 50 Hz, EU-plug

18-0402

Circulator-Bath (+20/+150)

Like 18-0403 but:
Heater capacity: 1000 W
Power supply: 115 V, 60 Hz

11-0181

Hose, silicon (Ø 8 mm, 8 m)

10-0377

Contrast Inlay (6 x 170 x 550 mm) pack of 1

10-0406

Corrosion Protection Specimen (200 x 100 mm) pack of 2

11-0599

USB/RS232-Converter (verified for petrotest®-units)

with 2 m cable connecting 1 serial port with the USB-port of a PC or Hub

25-0262

PC-Data-Cable (0-modem), 2 m, serial, RS232

Minimum equipment:

1 each of DDA 3, 10-0380, 10-0404

Spares (approx. 1 year):

3x molds & holders, 1x 10-0406

Additional requirements:

PC