13-2418

CFPP I - Cryostat Test Arrangement (1 Chamber)

ASTM D 6371 - EN 116 - EN 14214 - IP 309 - JIS K2288
(DIN 51 428, SIS 155 122)

For standard determination of the CFPP value down to -20°C,
at a bath temperature setting of - 34°C.

Consisting of:
Air-cooled refrigeration cabinet on castors.
1 Aluminum-Block test chamber with 4 test place avoiding the use of any hazardous bath medium, the aluminum block also serves as an air jacket; electronic temperature control in the range of +20 to -69° C block-temperature, digital display of real temperature.
Electronic heater for rapid warming of the test block when changeing from very low temperature to a higher one.

Supplied with:
1 CFPP-Test-Device consisting of:
1 test glass, 1 centering guide, 1 stopper, 1 test tube, 1 filter assembly,
1 thermometer ASTM 5C (-38 to +50 °C).

Note! The vacuum device is not included.

Power supply: 230 V, 50 Hz

13-2414

CFPP I - Cryostat Test Arrangement (1 Chamber)

Like 13-2418 but:
Power supply: 115 V, 60 Hz

13-0450

Vacuum Device

Consisting of:
2 pressure equalizing vessels (5 l) with stoppers and tubes,
U-tube manometer (250-0-250 mm), flow meter (1.6-16 l/h),
electric vacuum pump, hose, hose clip, T-piece and 3-way cock

Power supply: 230 V, 50 Hz

13-0449

Vacuum Device

Like 13-0450 but:

Power supply: 110/115 V, 60 Hz

10-0013

Water Jet Pump acc. to Hanff, made of glass

13-0010

Filter Paper II b DIN 52 135, pack of 100

16-0371

Thermometer ASTM 5C / IP 1C

Range: -38 to +50 : 1 °C
Length: 230 mm, Immersion: 108 mm, Ø 7 mm

16-0372

Thermometer ASTM 5C / IP 1C

Range: -38 to +50 : 1 °C (officially certified)

16-0375

Thermometer ASTM 6C / IP 2C

Range: -80 to +20 : 1 °C
Length: 230 mm, Immersion: 76 mm, Ø 7 mm

16-0376

Thermometer ASTM 6C / IP 2C

Range: -80 to +20 : 1 °C (officially certified)

13-0422

Test Jar, flat-bottom, 45 ml level marking

13-0424

Measuring Tube , made of glass

with 20 ml level mark, without filter assembly

13-0425

Gaskets (set of 10) for measuring tube (13-0424)

13-0426

Gaskets (set of 10) for the filter sieve (13-0427)

13-0427

Filter Sieve (45 µm mesh)

13-0430

Filter Assembly without measuring tube

Consisting of:
1 gasket for filter sieve and 2 gaskets for measuring tube.

13-0444

Centering Guide (for CFPP-units made since 2/2002)

13-0447

Stopper, PE (Ø 70 mm / bored twice)

for test-thermometer, pipet and evacuation

Minimum equipment:

1x 13-2418 + 1x 13-0450

Spares (approx. 1 year):

13-0424, 13-0425, 13-0010, Thermometer

Additional requirements: