16-1502

8-Place Liquid Bath - Oxidation Apparatus "BAM-250"

DIN 51 352-1+2 - IP 48 - ISO 6617-1+2

Consisting of:
stainless steel liquid bath, volume 35 l, equipped with a removable anti-air draught screen and test tube holder, thermostatic control, infinitely variable up to 250 °C +/-0.01 °C, integrated cooling coil, with digital display, stirrer, low level and temperature excess protection, thermometer IP 22C (+195 ... +205:0,1 °C), miniature spirit level vertical and horizontal, 2 flowmeter arrangements on very stable vibration avoiding stands, each comprising: 4 flowmeters with needle valve, flow rates of 1.6 ... 16 l/h. with works certificate.

Attention! Drain cock, glassware and catalyst matter are not included.

Power supply: 230 V, 50/60 Hz

16-1503

8-Place Liquid Bath - Oxidation Apparatus "BAM-250"

Like 16-1502 but:
Power supply: 115 V, 50/60 Hz

16-0720

Drain Cock for thermostatic baths (G¼")

16-1569

8-Place Dry-Heat Bath - Oxidation Apparatus "BAM-250"

Tube Ø 26
IP 48

Consisting of:

Dry Heat Bath (without accessories):
stainless steel dry-heat bath (ambient temperature up to +250 °C) with a heater block of aluminum; equipped with a LED indicating PID heater control.

2 Flowmeter Units:
flowmeter unit (flow rates of 1.6 ... 16 l/h, 4-place), with calibration certificate and needle valve.

Supplied with:
2 Front plates for bath, heat protect for bath, miniature spirit level vertical and horizontal, cover for bath-opening 29 mm, temperature measuring tube, o-ring for tube, thermometer holding stopper, connection hose 4 m, silicon, t-connector and thermometer (ASTM 41C/IP 81C).

Attention! Glassware and catalyst matter are not included.

Power supply: 230 V, 50/60 Hz

16-1570

8-Place Dry-Heat Bath - Oxidation Apparatus "BAM-250"

Tube Ø 26

Like 16-1569 but:
Power supply: 115 V, 50/60 Hz

16-1577

12-Place Dry-Heat Bath - Oxidation Apparatus "BAM-250"

Tube Ø 26
IP 48

Like 16-1569 but:
with 12-place bath, without protective screen for bath.

Power supply: 230 V, 50/60 Hz

16-1578

12-Place Dry-Heat Bath - Oxidation Apparatus "BAM-250"

Tube Ø 26

Like 15-1577 but:
Power supply: 115 V, 50/60 Hz

16-1504

Test Kit Type "IP 280" for 8 test places

ASTM D 2440 - EN 61 125 A+B+C - IP 48 - IP 280 - IP 306 -
IP 307 - IP 335 - ISO 7624 - JIS C2101

Consisting of:
16 oxidation / absorption tubes, complete with (ø 26 x 212 mm,
     NS 24/29) (each tube with 2 removable hose connectors)
  8 silicon connection hoses of 1m each
  2 o-ring sets (pack of 10 pcs.)

16-0443

Metal Test Specimens - Code: 409 C

for Oxidation of Mineral Oil, (BAM)
ASTM 2440 - EN 61 125 A+B+C - IP 48 - IP 306 - IP 307 - IP 335 - JIS C2101

Material/Composition: Copper wire
Dimension:Ø 1.01mm
Pack/Set: 5 kg

16-1558

Soap Bubble Meter Set 150 ml

DIN 51 352-1+2 - ISO 6617-1+2

21-0697

Digital Stop Watch

Consisting of:
7-digit LC display, max. 10 hours countdown with 1/100 sec. precision, Lithium battery
• quartz-controlled
• water resistant
• memory function
• calendar

25-0485

Vacuum-Pump with Mini-Compressor & Accessories

Consisting of:
1 oil-free diaphragm pump with filter
1 hose (Ø 6 mm x 1 m, silicon, clear)
1 T-piece connection (Ø 7.5 mm)
1 Hoffmann-Clip

Technical Data:
Max. capacity: 6 l/min
End vacuum: 100 mbar
Operating pressure : 2.4 bar (overpressure)
Dimensions / Weight : 9 x 17 x 12 cm (WxDxH), 1.9 kg

Power supply : 220/230 V, 50 Hz, EU-plug

25-0486

Vacuum-Pump with Mini-Compressor & Accessories

Like 25-0485 but:
Power supply: 115 V, 60 Hz

17-0802

Circulation Air Oven

Consisting of:
thermostatically-controlled, includes of 2-hours & permanent time switch, thermometer for temperature inspection and perforated intermediate bottom.

Important: Not explosion protected!

Technical Data:
Temperature range: +60 to +200 °C
Temperature constancy: +/- 2-3 K
Capacity: 14 l
Inner dimensions (W x H x D): 19 x 20 x 36 cm
Outer dimensions (W x H x D): 31 x 38.5 x 47 cm
Weight: 17 kg

Power supply: 230 V, 50/60 Hz

16-0720

Drain Cock for thermostatic baths (G¼")

16-1539

Oxidation Tube, complete

ASTM D 2440 - DIN 51 538 - EN 61 125 A+B+C - IP 48 - IP 280 -
IP 306 - IP 307 - IP 335 - ISO 7624 - JIS C2101

16-1553

O-ring (25 x 5.0 mm, 10 pcs.)

ASTM D 2440 - EN 61 125 A+B+C - IP 48 - IP 280 - IP 306 -
IP 307 - IP 335 - ISO 7624 - JIS C2101

16-1556

O-ring for temperature tube, 1 pc

ASTM D 2440 - EN 61 125 A+B+C - IP 48 - IP 280 - IP 306 -
IP 307 - IP 335 - ISO 7624 - JIS C2101

16-1555

O-ring for dry-heat bath with tube Ø 26

ASTM D 2440 - DIN 51 538 - EN 61 125 A+B+C - IP 48 - IP 280 -
IP 306 - IP 307 - IP 335 - ISO 7624 - JIS C2101

16-1531

Temperature Measuring Tube

ASTM D 2440 - DIN 51 373 - DIN 51 538 - DIN 51 352-1+2 -
EN 61 125 A+B+C - IP 48 - IP 280 - IP 306 - IP 307 - IP 335 -
ISO 6617-1+2 - ISO 7624 - JIS C2101

16-1579

Temperature Measuring Tube for dry-heat bath

with tubeØ 26
ASTM D 2440 - DIN 51 373 - DIN 51 538 - DIN 51 352-1+2 -
EN 61 125 A+B+C - IP 48 - IP 280 - IP 306 - IP 307 - IP 335 -
ISO 6617-1+2 - ISO 7624 - JIS C2101

16-1532

Stopper, Silicone (27/30 / bored Ø 6 mm)

16-0486

Thermometer IP 22C

Range: +195 to +205 : 0.1 °C
Length: 300 mm, Immersion: 100 mm, Ø 6.5 mm

16-0565

Flowmeter Unit (1.6-16 l/h)

DIN 51 352-1+2 - IP 48 - ISO 6617-1+2

16-0470

Soap Bubble Meter (150:1 ml)

DIN 51 352-1+2 - IP 48 - ISO 6617-1+2

25-0607

Heating Element HD 2000 W, 230 V

25-0608

Heating Element HD 1000 W, 115 V

Minimum equipment:

1x 15-1502 or 1x 16-1569 or 1x 16-1577, 1x 16-1504, 1x 16-0443

Spares (approx. 1 year):

Additional requirements:

To combine methods which need BAM-Apparatus
16-1500 & 16-1502, you may modify 16-1502 with
the following accessories:
2x 11-0093, 2x 16-0563, 1x 16-0469
(instead of ordering two baths)