10-0457

BPA 5 - Automatic Breaking-Point Tester -

Fraass Method

Bitumen: IP 80
Bitumen & Bituminous Binders: EN 12 593
(former: DIN 52 012 - NF T 66-026) - JIS K2207

Note: Cooler to counter-cool the Peltier-elements is required.
Power supply: 230 V, 50/60 Hz, 450 W, 2 A, EU-plug

10-0458

BPA 5 - Automatic Breaking-Point Tester -

Fraass Method

Like 10-0460 but:
Power supply: 115 V, 60 Hz, 450 W, 4 A, US-plug

25-0382

Circulation Cooler (for external cooling)

with insulated hose

For cooling of instruments without circulation pump (e.g. Peltier-cooling).

Consisting of:
Cooler with tank, Pt-100, digital display, pump and liquid level indication.

Supplied with: 1 insulated hose-set (Ø 8 mm, 2x 2m)

Technical Data:
Working range: -20 to +40 °C (+5 to +32 °C at ambient temp.)
Display / Resolution: digital / 0.1 °C
Control: digital
Cooling capacity: 300 W at +15 °C
Pump-Pressure capacity: 10 l/min, 200 mbar
Pump-Suction capacity: 17 l/min, 180 mbar
Volume: 1.4 l
Sockets for: hose (Ø 8 /12 mm)
Dimensions / Weight: 23 x 36 x 38 cm (WxDxH), 23 kg
Power supply: 230 V, 50/60 Hz, 2.8 A, EU-plug

25-0383

Circulation Cooler (external cooling)

with insulated hose

Like 25-0382 but:
Power supply: 115 V, 60 Hz

12-0495

Circulator (external & internal heating & cooling)

with insulated hose

For heating & cooling of instruments without circulation pump
and / or for tempering applications directly in the bath.

Consisting of:
Cooler with stainless steel bath.Thermostat with digital display, splash-proof keypad, heater, pump, RS232-interface, over/under-temperature & low-level protection, adjustable pump-pressure, proportional cooling control.

Supplied with: 1 bath cover, 1 drain tap, 1 insulated hose-set (Ø 8 mm, 2x 2m)

Technical Data:
Working range: -40 to +200 °C (at +5 to +40 °C ambient temp.)
Display / Resolution: LED / 0.1 °C
Control: PID
Heater capacity: 2000 W
Cooling capacity: 680 W at +20 °C
Pump-Pressure capacity: 11-16 l/min, 450 mbar
Bath opening: 23 x 14 x 20 cm (WxDxH)
Safety class / Bath fluid: 3 / FL (Flammable Liquids possible)
Volume: 16 l
Dimensions / Weight: 37 x 46 x 69 cm (WxDxH), 48 kg
Power supply: 230 V, 50 Hz, EU-plug

12-0496

Circulator (external & internal heating & cooling)

with insulated hose

Like 12-0495 but:
Power supply: 230 V, 60 Hz (115 V not available)

10-0474

Calibration Set - BPA 5

Consisting of:
1 set of precision resistor plugs,
2 weights,
1 calibrated thermometer IP42C

10-0475

Laboratory Stand for calibration set

10-0473

PC Software - BPACon (Windows®)

The Program includes the Permanent-Bending-Test software and is used to store / modify and display curves of force for
- Breakpoint-Tests
- Permanent-Bending-Tests
- Glass-Transition-Temperature-Tests

It replaces the serial printer and makes it is possible to start/stop the BPA/BBS by PC, as well as to load self-defined test-programs.

The progression in elasticity, plasticity and of course cracking will be displayed numerically or graphically in different scales. With special created curves of trends for bending or recovery force even very small, nearly not visible, breaks of the material can be found in an unknown high precision.

Supplied with: 1 PC-data-cable, 1 USB/RS232-converter

25-0282

Impact Printer (mono)

for single sheets & continuous paper
to record data like test results, duration of test, etc. (instead of a PC)

Supplied with: 2 data cables (9-pin 25-0304, USB 25-0918), 1 ink ribbon (black)

Technical Data:
Line spacing: 80 characters per line (10 cpi)
Page size : 257 x 364 mm (sheet), 254 x 558.8 mm (roll)
Ports: serial (9-pin), USB (1.1)
Dimensions: 37 x 28 x 16 cm (WxDxH)
Weight: 5 kg
Power supply: 220/240 V, 50/60 Hz

25-0283

Impact Printer

Like 25-0282 but:
Power supply: 110/130 V, 50/60 Hz

10-0007

Melting Apparatus

for bitumen samples having a ring & ball softening-point
<100 °C.

Consisting of:
heater plate (steplessly regulated) with thermometer socket and cooling plate with hose connections; magnetic test-plaque holder (40 x 60 x 8 mm) with cover

Supplied with: 1 thermometer (0 to +200 : 1 °C)

Note: circulation cooler is recommended

Technical Data:
Dimensions / Weight : 23 x 35 x 13 cm (W x D x H), 5 kg
Power supply : 230 V, 50 Hz, 150 W, EU-plug

10-0233

Tongs to hold handle test-plaques

12-1763

Storage Box for spare parts and tools

10-0006

Test-Plaques

10 pieces (41 x 20 x 0.15 mm), steel

10-0016

Test-Plaques, with works certificate

10 pieces (41 x 20 x 0.15 mm), steel

25-0228

Hose-Set, insulated (Ø 8 mm, 2 x 2 m, incl. fittings)

11-0599

USB/RS232-Converter (verified for petrotest®-units)

with 2 m cable connecting 1 serial port with the USB-port of a PC or Hub

25-0262

PC-Data-Cable (0-modem), 2 m, serial, RS232

25-0304

Printer-Data-Cable, serial, for autom. petrotest® units

Minimum equipment:

1x 10-0457, 1x cooler

Spares (approx. 1 year):

5x 10-0006

Additional requirements:

coolant