26-0010

Tempering Bath for determinations up to +60 °C

by pycnometer, hydrometer or viscometer.

Consisting of:
Acrylic glass bath (foot print 280 x 430 mm, depth of the bath 300 mm) with cooling-coil. Thermostat with digital display, splash-proof keypad, heater, pump and over-temperature protection.

Supplied with:
1 pycnometer bath cover with 4 openings (Ø 50.5 mm)
1 hydrometer bath insert with clamps, 4 openings (Ø 55 mm)
   and 4 cylinders (Ø 54 x 300 mm)
5 lids (20-0024) for the unused openings
1 bath-thermometer, -2 to +105 :0.5 °C (incl. stopper)

Note!
Bath is suitable for hydrometer with an overall length of maximal 275 mm or viscometers. Measurements at temperatures lower than +25 °C require a counter-cooling device, e.g. Recirculating Cooler 25-0368 or 25-0373.

Technical Data:
Testplaces: 4
Working range: approx. +25 to +60 °C (without counter-cooling)
Display / Resolution: LED / 0.1 °C
Control: PID
Heater capacity: 2000 W (115 V - 1000 W)
Pump-Pressure capacity: 15 l/min, 340 mbar
Bath opening: 26 x 26 x 30 cm (W x D x H)
Safety class / Bath fluid: 1 / NFL (water / water-antifreeze-mix only)
Volume: 30 l
Sockets for: hose (Ø 8 / 10 mm)
Dimensions: 28 x 43 x 50 cm (W x D x H)

Power supply: 230 V, 50 Hz

26-0011

Tempering Bath for determinations up to +60 °C

Like 26-0010 but:
Power supply: 115 V, 50/60 Hz

11-0030

Stopper, NBR-rubber (18/20 / bored Ø 7.5 mm)

26-0004

Hydrometer Cylinder

(54 mm Ø by 300 mm high) suitable for the Tempering Bath

26-0005

Bath Insert, interchangeable

with 4 openings to fit hydrometer cylinders 26-0004, also used to upgrade Viscosity Bath 20-0000/1

13-0715

Thermometer ASTM 12C / IP 64C

Range: -20 to +102 : 0.2 °C
Length: 420 mm, Immersion: total, Ø 7 mm

13-0716

Thermometer ASTM 12C / IP 64C

Range: -20 to +102 : 0.2 °C (officially certified)

13-0717

Thermometer ASTM 12F / IP 64F

Range: -5 to +215 : 0.5 °C
Length: 420 mm, Immersion: total, Ø 7 mm

13-0718

Thermometer ASTM 12F / IP 64F

Range: -5 to +215 : 0.5 °C (officially certified)

21-0601

Thermometer ASTM 17C

Range: +19 to +27 : 0.1 °C
Length: 275 mm, Immersion: total, Ø 6.5 mm

21-0607

Thermometer ASTM 17C

Range: +19 to +27 : 0.1 °C (officially certified)

21-0621

Thermometer ASTM 17F

Range: +66 to +80 : 0.2 °F
Length: 275 mm, Immersion: total, Ø 6.5 mm

21-0627

Thermometer ASTM 17F

Range: +66 to +80 : 0.2 °F (officially certified)

21-0606

Thermometer ASTM 22C / IP 24C

Range: +95 to +103 : 0.1 °C
Length: 275 mm, Immersion: total, Ø 7 mm

21-0612

Thermometer ASTM 22C / IP 24C

Range: +95 to +103 : 0.1 °C (officially certified)

21-0626

Thermometer ASTM 22F / IP 24F

Range: +204 to +218 : 0.2 °F
Length: 275 mm, Immersion: total, Ø 7 mm

21-0632

Thermometer ASTM 22F / IP 24F

Range: +204 to +218 : 0.2 °F (officially certified)

10-0385

Thermometer ASTM 63C

Range: -8 to +32 : 0.1 °C
Length: 379 mm, Immersion: total, Ø 7.5 mm

10-0386

Thermometer ASTM 63C

Range: -8 to +32 : 0.1 °C (officially certified)

10-0387

Thermometer ASTM 63F

Range: +18 to +89 : 0.2 °F
Length: 379 mm, Immersion: total, Ø 7.5 mm

10-0388

Thermometer ASTM 63F

Range: +18 to +89 : 0.2 °F (officially certified)

26-0036

Thermometer IP 39C

Range: -1 to +38 : 0.1 °C
Length: 440 mm, Immersion: total, Ø 6.5 mm

26-0037

Thermometer IP 39C

Range: -1 to +38 : 0.1 °C (officially certified)

26-0038

Thermometer IP 39F

Range: +30 to +100 : 0.2 °C
Length: 440 mm, Immersion: total, Ø 6.5 mm

26-0039

Thermometer IP 39F

Range: +30 to +100 : 0.2 °C (officially certified)

11-0022

Thermometer

Range: 0 to +105 : 0.5 °C

10-0383

Thermometer DIN 12775 - E0,1/0/50

Range: 0 to +50 : 0.1 °C
Length: 220 mm, Immersion: --, Ø 8 mm

10-0384

Thermometer DIN 12775 - E0,1/0/50

Range: 0 to +50 : 0.1 °C (officially certified)

26-0001

Cardanic Suspension with stand

Consisting of:
1 glass cylinder 26-0002
(not to be used in previously described baths)

26-0002

Spare Glass Cylinder for cardanic suspension

Dimensions: Ø 58 mm, 450 mm in length

Minimum equipment:

1x 26-0010

Spares (approx. 1 year):

11-0030, 26-0004, Thermometer

Additional requirements:

Hydrometers and Pycnometers