10-0000

Manual Breaking-Point Tester, Fraass Method

IP 80 - EN 12 593 (DIN 52 012, NF T66-026) - JIS K2207

Consisting of:
cooling apparatus (test tube, stopper and Dewar-flask with metal stand); bending apparatus with small stopper

Supplied with:
10 test-plaques (41 x 20 x 0.15 mm)
1 thermometer IP42C

Note: protection vessel for Dewar-flask and tongs are recommended

10-0090

Protection Vessel (Acryl)

(inside Ø 125 x 245 mm) for Dewar -flask

10-0233

Tongs to hold handle test-plaques

10-0507

BPM 5 - Melting Apparatus

Consisting of:
steplessly regulated red heater plate (11 x 9 cm) with thermometer socket; blue cooling plate (11 x 9 cm) (hose connections for a cooler in the rear); holder for a depositing pan

Supplied with:
1 thermometer ASTM 2C (-5 to +300 : 1 °C), 1 magnetic test-plaque holder (50 x 40 x 8 mm), 1 cover hood for better tempering of the test-plaques, 1 T-shaped spirit-level, 10 aluminum depositing pans

Note: We suggest a connection in series with the BPA and its circulation cooler.

Technical Data:
Dimensions / Weight : 23 x 40 x 30 cm (W x D x H), 6.5 kg
Power supply : 230 V, 50 Hz, EU-plug

10-0506

BPM 5 - Melting Apparatus

Like 10-0507 but:
Power supply : 115 V, 60 Hz, US-plug

10-0006

Test-Plaques

10 pieces (41 x 20 x 0.15 mm), steel

10-0016

Test-Plaques, with works certificate

10 pieces (41 x 20 x 0.15 mm), steel

10-0002

Bending Apparatus

Consisting of:
two concentric tubes fitted with plaque-holding clips, curved spacer, crank-operated cone-and-peg mechanism, setting screw and rubber stopper

10-0003

Cone-and-Peg Mechanism, hardened and polished

10-0004

Setting Screw , with a hardened tip

10-0008

Test-Tube

10-0009

Dewar-Flask made of borosilicate glass

1-litre, Ø 75 x 205 mm, without stand

20-0106

Metal Stand for Dewar-flask

10-0010

Stopper, (NBR-rubber)

Ø 83/71 x 60 mm, bored twice (Ø 15 & 38 mm), to support the test-tube in the Dewar-flask and allow filling at the same time

10-0017

Thermometer IP 42C

Range: -38 to +30 : 0.5 °C
Length: 370 mm, Immersion: 250 mm, Ø 6.5 mm

Minimum equipment:

1x 10-0000, 1x 10-0090

Spares (approx. 1 year):

10-0006, 10-0008, 10-0017

Additional requirements:

funnel, cooling matter