18-0065

Tempering-Bath (Transfer Dish), nickel-plated brass

to keep a constant sample-temperature on the PNR-table,
Ø 160 x 80 mm, without heat exchanger

18-0070

Tempering-Bath (Transfer Dish), nickel-plated brass

to keep a constant sample-temperature on the PNR-table,
Ø 160 x 80 mm, with serpentine heat exchanger tube and hose sockets to connect a circulator.
(effective inside Ø 135 x 70 mm) ASTM D 2884

18-0091

Spacer Plate

for tempering-baths (18-0065, 18-0070)

18-0094

Thermometer Holder

for tempering-baths (18-0065, 18-0070)
to hold thermometer (18-0093 / 16-0376 / 90-0106 / 90-0166
or 90-0107 / 90-0167)

18-0170

Tempering-Bath, borosilicate glass

ASTM D 1321
with heat-exchanger coil (effective inside Ø 185 x 90 mm) to connect a circulator and an intermediate bottom as well as a thermometer holder

18-0168

Heat-Exchanger Coil and Intermediate Bottom

for tempering-bath (18-0170)

18-0169

Glass-Bath with spout, borosilicate glass, 2 liter

for tempering-bath (18-0170)

21-0091

Thermometer DIN 12 785

Range: 0 to +55 : 0.2 °C

21-0092

Thermometer DIN 12 785

Range: 0 to +55 : 0.2 °C (officially certified)

90-0106

Thermometer ASTM 63C

Range: -8 to +32 : 0.1 °C
Length: 379 mm, Immersion: total, Ø 7.5 mm

21-0662

Thermometer ASTM 63C

Range: -8 to +32 : 0.1 °C (officially certified)

90-0107

Thermometer ASTM 64C

Range: +25 to +55 : 0.1 °C
Length: 395 mm, Immersion: total, Ø 7.5 mm

21-0663

Thermometer ASTM 64C

Range: +25 to +55 : 0.1 °C (officially certified)

25-0670

Circulator-Bath Set (internal & external heating & cooling)

with intermediate bottom & circulation cooler

Circulator-Bath for tempering small instruments with heat-exchanger tube but without circulation pump (e.g. PNR™-tempering dish) and / or for tempering directly in the bath (e.g. sample pre-tempering).
Consisting of: Stainless steel bath with drain tap. Thermostat with digital display, splash-proof keypad, integrated heater, pump and over-temperature protection.

Circulation Cooler for cooling or counter cooling the circulator-bath.
Consisting of: Cooler with tank, Pt100, digital display, pump and liquid level indication.

Supplied with:
1 circulator-bath (25-0672),
1 intermediate bottom (25-0674), 1 cooling-coil (25-0572),
1 insulated hose-set (Ø 8 mm, 2x 2m) (25-0228),
1 circulation cooler (25-0248)

Technical Data:
Working range: +5 to +100 °C (at +5 to +40 °C ambient temp.)
Display / Resolution: digital / 1 °C

Bath
Heater capacity : 2000 W
Pump-Pressure capacity : 15 l/min, 350 mbar
Volume: 27 l
Bath opening: 36 x 30 x 20 cm (WxDxH)
Dimensions / Weight: 57 x 37 x 42 cm (WxDxH), 13 kg

Cooler
Cooling capacity: 300 W at +15°C
Pump-Pressure capacity: 20 l/min, 200 mbar
Pump-Suction capacity : 17 l/min, 180 mbar
Volume: 1.4 l
Dimensions / Weight: 23 x 36 x 38 cm (WxDxH), 23 kg

Power supply: 230 V, 50 Hz, EU-plug

25-0671

Circulator-Bath Set (internal & external heating & cooling)

with intermediate bottom & circulation cooler

Like 25-0670 but:
Power supply: 115 V, 60 Hz

18-0304

Circulator-Bath (internal & external heating)

with cooling-coil

For tempering applications directly in the bath (e.g. sample
pre-tempering) and / or for heating of instruments without circulation pump (e.g. PNR-tempering dish).

Consisting of:
Stainless steel bath with cooling-coil. Thermostat with digital display, splash-proof keypad, integrated heater, pump and over-temperature protection.

Supplied with: 1 bath cover, 1 hose-set (2x 1 m Ø 8 & 10 mm)

Note:
Requires counter-cooling by circulation cooler or circulator for applications near ambient temperature. Insulated hose-set is recommended.

Technical Data:
Working range: +20 to +100 °C (at +5 to +40 °C ambient temp.)
Display / Resolution: LED / 0.1 °C
Control: PID
Heater capacity: 2000 W
Pump-Pressure capacity: 15 l/min, 340 mbar
Bath opening: 15 x 15 x 15 cm (WxDxH)
Safety class / Bath fluid: 1 / NFL (Non Flammable Liquids only)
Volume: 4.5 l
Sockets for: hose (Ø 8 / 10 mm)
Dimensions / Weight: 17 x 33 x 36 cm (WxDxH), 7 kg
Power supply: 230 V, 50 Hz, EU-plug

18-0305

Circulator-Bath (internal & external heating)

with cooling-coil

Like 18-0304 but:
Heater capacity: 1000 W
Power supply: 115 V, 60 Hz

18-0403

Circulator-Bath (internal & external heating)

with cooling-coil & intermediate bottom

For tempering applications directly in the bath (e.g. sample pre-tempering) and / or for heating of instruments without circulation pump (e.g. PNR-tempering dish).

Consisting of:
Stainless steel bath with adjustable intermediate bottom and cooling-coil.
Thermostat with digital display, splash-proof keypad, heater, pump, RS232-interface, over-temperature- & low-level-protection.

Supplied with:
1 bath cover Ø 5 cm, 1 bath cover 20 x 20 cm, 1 thermometer (-2 to +105 : 0.5 °C)

Note:
Requires counter-cooling for applications near ambient temperatures. Hose not included. Insulated hose-set is recommended.

Technical Data:
Working range: +20 to +150 °C (at +5 to +40 °C ambient temp.)
Display / Resolution: LED / 0.01 °C
Control: PID
Heater capacity: 2000 W
Pump-Pressure capacity: 15 l/min, 320 mbar
Bath opening: 20 x 20 x 25 cm (WxDxH)
Safety class / Bath fluid: 3 / FL (Flammable Liquids possible)
Volume: 20 l
Dimensions / Weight: 37.5 x 45 x 47.5 cm (WxDxH), 3.4 kg
Power supply: 230 V, 50 Hz, EU-plug

18-0402

Circulator-Bath (internal & external heating)

with cooling-coil & intermediate bottom

Like 18-0403 but:
Heater capacity: 1000 W
Power supply: 115 V, 60 Hz

18-1730

Tempering Plate for adhensions measurements

Consisting of:
an external tempered aluminum plate with a slot for a sample cup, sockets to connect a circulator, fixed on PNR-table by clamping stones.

18-1731

Sample Jar for tempering plate, brass, Ø 15 x 0.4 mm

11-0181

Hose, silicon (Ø 8 mm, 8 m)

25-0228

Hose-Set, insulated (Ø 8 mm, 2 x 2 m, incl. fittings)

Minimum equipment:

Tempering Units (see above)

Spares (approx. 1 year):

Additional requirements: