Manufacturer of Petroleum Test Equipment since 1873

Product   

  Paraffin Wax Content - Distillation Method


Main Unit   

10-0160

 

Paraffin Wax Content Apparatus

EN 12 606-1 (DIN 52 015) - IP 459-1

Consisting of:

Distillation Unit:
100 ml distillation flask with stopper and protecting ring, support stand, universal gas burner, Erlenmeyer flask (100 ml) with drilled rubber stopper, adjustable table with glass vessel (diameter 140 x 75 mm)

Filtration Unit:
Cooling bath for direct cooling with sockets for tempering unit, suction flask (500 ml) with drilled stopper, water jet pump with U-tube vacuum meter and 2 meters tubing, 3 test tubes with spout, drilled stopper 3 special test tubes (NS 29/32) with splash bulb attachment, bath thermometer
(-30 ... +50:0.5 °C), sample thermometer (-38 ... +50:1 °C) congealing point thermometer (0 ... +100 °C) with sleeve stand

Power supply: 230 V, 50/60 Hz

 


Options & Accessories   

17-0710

 

Circulator (-35/+200) with insulated hose set

Circulator

progammable & regulated by Main-Unit

For heating & cooling of instruments without circulation pump
and / or for tempering applications directly in the bath.

Consisting of:
Cooler with stainless steel bath. Thermostat with digital display, splash-proof keypad, integrated heater, pump, RS232-interface, Pt-100-socket, programmer, over/under-temperature & low-level protection, adjustable pump-pressure, cooling control.

Supplied with: 1 bath cover, 1 drain tap, 1 insulated hose-set (Ø 8 mm, 2x 2 m)

Technical Data:
Working range: -35 to +200 °C (at +5 to +40 °C ambient temp.)
Display / Resolution: VFD / 0.01 °C
Control: Integrated Programmer
Heater capacity: 2000 W
Cooling capacity: 450 W at +20 °C
Pump-Pressure capacity: 22-26 l/min, 0.4-0.7 bar (5.8-10.2 psi)
Pump-Suction capacity: 22-26 l/min, 0.2-0.4 bar (2.9-5.8 psi)
Bath opening: 18 x 12 x 15 cm (WxDxH)
Safety class / Bath fluid: 3 / FL (Flammable Liquids possible)
Volume: 8 l
Sockets for: hose (Ø 8 / 12 mm), Pt-100, solenoid valve
Dimensions / Weight: 31 x 42 x 66 cm (WxDxH), 38 kg
Power supply: 230 V, 50 Hz, 12 A, EU-plug

 

17-0711

 

Circulator (-35/+200) with insulated hose set

Like 17-0710 but:
Heater capacity: 1000 W
Power supply: 115 V, 60 Hz, US-plug

 

17-0802

 

Circulation Air Oven

Circulation Air Oven

Consisting of:
thermostatically-controlled, includes of 2-hours & permanent time switch, thermometer for temperature inspection and perforated intermediate bottom.

Important: Not explosion protected!

Technical Data:
Temperature range: +60 to +200 °C
Temperature constancy: +/- 2-3 K
Capacity: 14 l
Inner dimensions (W x H x D): 19 x 20 x 36 cm
Outer dimensions (W x H x D): 31 x 38.5 x 47 cm
Weight: 17 kg

Power supply: 230 V, 50/60 Hz

 

17-0804

 

Circulation Air Oven

Like 17-0802 but:
Power supply: 115 V, 50/60 Hz

 

25-0470

 

Vacuum-Pump with mini-compressor

Vacuum-Pump with mini-compressor

(oil-free diaphragm pump with filter)

Technical Data:
Max. capacity:              6 l/min
End vacuum:               100 mbar
Operating pressure :   2.4 bar (overpressure)
Dimensions / Weight : 9 x 17 x 12 cm (WxDxH), 1.9 kg

Power supply : 220/230 V, 50 Hz, EU-plug

 

25-0471

 

Vacuum-Pump with mini-compressor

Like 25-0470 but:
Power supply: 110/115 V, 60 Hz

 
Spare Parts   

16-0264

 

Thermometer DIN 12 775

Range: -30 to +50 : 0.5 °C

 

16-0313

 

Thermometer DIN 12 785

Range: -38 to +50: 1 °C

 

17-0010

 

Thermometer ISO 2207

Range: -0 to +100 : 0.5 °C

 

10-0236

 

Stopper, NBR-rubber (30/35 / bored Ø 5 mm)

 

11-0030

 

Stopper, NBR-rubber (18/20 / bored Ø 7.5 mm)

 

10-0013

 

Water Jet Pump acc. to Hanff, made of glass

 

10-0136

 

Vacuum flask, 500 ml with bored stopper (NS 34 mm)

 

10-0239

 

Stopper, NBR-rubber (38/35 / bored Ø 10 mm)

 

10-0144

 

Distillation Flask EN 12606-1, 100 ml (NS 16 mm)

 

10-0145

 

Protecting Ring for distillation flask

 

10-0234

 

Stopper, NBR-rubber (14.5/20)

 

10-0166

 

Receiver Erlenmeyer Flask, 100 ml (NS 19 mm)

 

10-0235

 

Stopper, NBR-rubber (22/25)

 

10-0167

 

Test Tube with spout EN 12606-1

 

10-0168

 

Reagent Tube with standard taper NS 29/32

 

10-0169

 

Splash Head with standard taper NS 29/32

 

10-0170

 

U-Tube-Manometer (500-0-500 mm scale)

acrylic tube fit on a metal plate for wall mounting. Suitable for measuring pressures to 98 mbar with water filling or 1.33 bar with mercury filling.
Note! Mercury is not included (needed qunatity approx. 350 g).

 

10-0171

 

Round Filter Ø 110 mm, pack of 100

 

11-0110

 

Universal Gas Burner

for town gas (<800°C), butane, propane & natural gases (<1150°C)

 

13-0923

 

Connection Tube 1 m (5 x 1.5 mm, Silicon)

 

16-0925

 

Spare Test Cup DIN 12 338, 700 ml, made of glass

 
Order Guideline   

Minimum equipment:

1x 10-0160

Spares (approx. 1 year):

Thermometer, Stopper, 10-0136, 10-0144,
10-0166, 10-0167, 10-0168, 10-0171, 16-0925

Additional requirements: