| Product |
Flash-Point with Closed Cup - Pensky-Martens Method -
PMA 4 with Sample Changer (automatic)
| Main Unit |
12-2770 | PMA 4 S - Automatic Flash-Point Tester |
|
![]() | Pensky-Martens Method with Sample Changer Pensky-Martens Method: Biodiesel Method: ASTM D 93 C - ASTM D 6751 Limit Test (eatable oils &fats): ISO 15 267 - BS 684-1.17 Consisting of: Sample Changer with 12-place carrousel, transfer arm with housing and positioning devices. PC-Software "FPPnet" (Windows®): Supplied with: To be ordered separately: Temperature Range: +40 to +360 °C (+104 to +680 °F) Power supply: 115/230 V, 50/60 Hz, EU-plug |
|
12-2771 | PMA 4 S - Automatic Flash-Point Tester |
|
Pensky-Martens Method with Sample Changer Like 12-2770 but: |
||
12-2772 | PMA 4 FS - Automatic Flash-Point Tester |
|
![]() | Pensky-Martens Method with Fire-Extinguishing Device & Sample Changer Like 12-2770 but:
Power supply: 115/230 V, 50/60 Hz, EU-plug |
|
12-2773 | PMA 4 FS - Automatic Flash-Point Tester |
|
Pensky-Martens Method with Fire-Extinguishing Device & Sample Changer Like 12-2772 but: |
||
12-2776 | PMA 4 SC - Automatic Flash-Point Tester |
|
![]() | Pensky-Martens Method with Chilled Sampler Set Like 12-2770 but: The carrousel is made out of a two-layer metal block with an internal heat exchanger coil to stabilize the temperature to a level deviating from the ambient temperature. An acrylic-glass cover is designed to reduce the loss of cooling energy. Note: A coolant circulator is required as a source of cooling energy to keep the temperature in the samples at approx. +4°C (ambient not exceeding +24°C). We recommend to order circulator 25-0240. Temperature Range: approx. +4°C to +360°C Power supply: 115/230 V, 50/60 Hz, EU-plug |
|
12-2777 | PMA 4 SC - Automatic Flash-Point Tester |
|
Pensky-Martens Method with Chilled Sampler Set Like 12-2776 but:
|
||
12-2778 | PMA 4 FSC - Automatic Flash-Point Tester |
|
Pensky-Martens Method with Fire-Extinguishing Device & Chilled Sampler Set Like 12-2770 but: Power supply: 115/230 V, 50/60 Hz, EU-plug |
||
12-2779 | PMA 4 FSC - Automatic Flash-Point Tester |
|
Pensky-Martens Method with Fire-Extinguishing Device & Chilled Sampler Set Like 12-2778 but:
|
||
25-0240 | Circulator (-28/+200) |
|
![]() | For heating & cooling of instruments without
circulation pump Consisting of: Supplied with: 1 bath cover, 1 drain tap Note: Insulated hose-set is recommended. Technical Data: |
|
25-0241 | Circulator (-28/+200) |
|
Like 25-0240 but: |
||
| Options & Accessories |
12-0777 | Standard Test Insert - PM |
|
![]() | Consisting of: |
|
12-0785 | Standard Cup - PM |
|
approx. 75 ml (with filling mark), made of brass |
||
12-0786 | Standard Cover - PM |
|
for standard cup with shutter assembly, made of brass |
||
12-0787 | Standard Multi-Detector - PM |
|
![]() | with flash-point detector (thermocouple) and temperature probe (made of glass) |
|
12-2787 | Standard Multi-Detector - PMA , with DKD-certificate |
|
![]() | Like 12-0787 but: |
|
12-1790 | Test Insert - PM-NIRO |
|
![]() | Consisting of: |
|
12-1791 | Cup - PM-NIRO |
|
approx. 75 ml ( with filling mark), made of stainless steel |
||
12-1792 | Cover - PM-NIRO |
|
for test cup with shutter assembly, made of stainless steel |
||
12-0784 | Multi-Detector - PM-NIRO |
|
![]() | with flash-point detector (thermocouple) and temperature probe (made of stainless steel) |
|
12-1777 | Milli Test Insert - pPM |
|
![]() | Consisting of: |
|
12-1785 | Milli Cup - pPM |
|
approx. 15 ml, made of brass |
||
12-1786 | Milli Cover - pPM |
|
for test cup with shutter assembly, made of brass |
||
12-1787 | Milli Multi-Detector - pPM |
|
![]() | with flash-point detector (thermocouple) and temperature probe (made of stainless steel) |
|
12-0782 | Calibration Set - PMA/PM |
|
![]() | Consisting of: |
|
12-1760 | Holding Device for Multi-Detector (PMA & ABA/TAG) |
|
![]() | suitable for:
|
|
50-9110 | Reference Liquid - Flash-Point - Pensky-Martens - Type: PM-A 65 |
|
ASTM D 93-A
|
||
50-9112 | Reference Liquid - Flash-Point - Pensky-Martens - Type: PM-B 203 |
|
ASTM D 93-B
|
||
50-9113 | Reference Liquid - Flash-Point - Pensky-Martens - Type: PM-A 58 |
|
![]() | ASTM 93-A
|
|
50-9024 | Reference Liquid - MTVM - Type: Gas Oil |
|
Distillation: ASTM D 86, ASTM D 1298, IP 123, IP 160, ISO 3405, ISO 3675
|
||
12-5793 | Handle for permanent fixing at a cup |
|
12-1508 | Draft Deflector (recommended for gas ignition tests) |
|
12-1509 | Stand to hold 12 multi-detectors |
|
12-1763 | Storage Box |
|
![]() | for spare parts and tools |
|
25-0804 | Computer with Monitor |
|
(detailed specifications upon request) |
||
11-0599 | USB/RS232-Converter (verified for petrotest®-units) |
|
![]() | with 2 m cable connecting 1 serial port with the USB-port of a PC or Hub |
|
25-0282 | Impact Printer (mono) |
|
![]() | for single sheets & continuous paper
Supplied with: 2 data cables (9-pin 25-0304, USB 25-0918), 1 ink ribbon (black) Technical Data: |
|
25-0283 | Impact Printer |
|
Like 25-0282 but: |
||
| Spare Parts |
12-0600 | Tray for cup and multi-detector |
|
Note! Available as an option for all units built before 05/2004. |
||
12-5790 | Tong for test cups without handle |
|
safe handling of hot test inserts |
||
12-0778 | Electric Igniter |
|
![]() | with connector cable and plugs |
|
12-0779 | Gas Igniter with 20 cm hose |
|
12-0781 | Gas Supply Tubing, 1 meter |
|
12-0788 | Safety Detector |
|
to control gas igniter and external inflammation |
||
12-0780 | Stirrer Couplings for units built until 12/2001, pack of 10 |
|
12-1507 | Stirrer Couplings , pack of 10 |
|
12-0791 | Stopper, brass (Ø 18 mm) |
|
to close the thermometer or multi-detector opening of the cover before use |
||
25-0229 | Hose-Set (Ø 10 mm) |
|
insulated, 2x 2 m, incl. fittings |
||
| Order Guideline |
Minimum equipment: |
1x PMA 4 Sampler (see above) |
Spares (approx. 1 year): |
1x 12-0787, 2x 12-0778, 1x stirrer couplings |
Additional requirements: |
Gas & electrical supply |




















