Standard(s): 

ASTM D 92, ISO 2592, DIN 51376 (obs.), EN 22592 (obs.), FTM 791-1103, IP 36, JIS K2265-4, NF T60-118 (obs.), BS 4689 (obs.), GOST 4333, Superpave®

Product group(s): Bitumen, Flash Point

User group(s): Bitumen, Engine Oil, Hydraulic Fluid, Insulating Oil, Jet Lube, Lube Oil, Power Plant, Regulatory Authorities, Turbine Oil

Scope:

This flash-point and fire-point test method measures the tendency of a test specimen to form a flammable mixture with air.
Suitable for viscous materials having a flash-point between +79 °C (175 °F) and +400 °C (752 °F) except fuel oils. Used to define the hazards of flammable and combustible materials according to shipping and safety regulations.

Features

• Automatically lights test flame, relights if necessary during the test, suppresses gas source at end of test
• Built-in sensor for automatic barometric pressure correction
• Overheating detection with automatic heat shut-off during the test
• Pt-100 glass probe included, stainless steel type optional
• Manual testing, preset or individually set programs
• 2 Calibration modes: dynamic calibration against certified ASTM-thermometer or
  sample Pt-100 calibration by correction table with 21 calibration points (preset every 20°C or user defined)
• Calibration protocol print out
• Jog-Shuttle operation (turn & push) with LED indication for operation (blue flashing), cooling down (red), failure (red flashing)
• Multi-language user support (English, French, German, others planned)
• Memory for 1000 tests, 20 operator names, 100 sample names, 21 test methods
• Message when result is out of specification
• Statistical result analysis (MIN, MAX, AVE, Repeatability)
• Password protection access for Service & Configuration level (supervisor master password)
• Easy firmware update and data handling via USB stick or import into EXCEL